The Activator IV part # 5504 that you referenced is a time delayed brake controller designed to activate the electric brakes of a trailer in a smooth, controlled manner. Check out the FAQ article I attached on brake controllers to see more information on them.
The Activator IV is what is considered a time-delayed brake controller. With Time Delayed trailer brake controllers, once the brake pedal is stepped on, the pre-determined amount of power (which is set by the user, based on trailer... view full answer...
To add a 7-Way connector to your 2017 Toyota Highlander, I recommend the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your Highlander with an included bracket. This kit is designed for use on a vehicle like yours with an existing 4-way flat trailer connector and plugs directly into it.
You will then connect the blue wire to the blue wire on the brake controller, connect... view full answer...
The red button on the top of the Hopkins Agility Trailer Brake Controller # HM47294 is the manual override lever. When you slide this lever your trailer brakes should activate.
If it seems like your brake controller is not activating like it should you might go over the install and setup process. What does the display show when you are pressing the brakes?
I attached an FAQ article on troubleshooting brake controllers for you to check out as well. view full answer...
Since your in-laws 2023 Highlander already has a 4-way connector, you will want the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your Toyota with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it.
You will then connect the blue wire to the blue wire on the brake controller, the black... view full answer...
If your 2018 Chevy Suburban came from the factory with a 7-way connector, the port for the brake controller adapter is located in the junction box located behind the emergency brake pedal. I have attached a picture below to help you find it.
For a compatible easy to use brake controller, I recommend the Redarc Tow-Pro Liberty Brake Controller item # RED24FR. This is a proportional brake controller that activates your trailer's brakes when your Suburban decelerates. It has a unique installation... view full answer...
The best brake controller for your 2008 Chevy Silverado is going to be the Redarc Tow-Pro Liberty Trailer Brake Controller item # RED24FR. This is a proportional brake controller that automatically adjusts your trailer's braking based on the deceleration of your Silverado. The Liberty has a unique installation method where the main unit is concealed behind your dash and the only part visible is the control knob.
You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake... view full answer...
Yes, it is. Since your 2020 Jeep Grand Cherokee does not have the tow package you have to install the Universal Installation Kit for Trailer Brake Controller item # ETBC7. This is in addition to an existing 4-way connector like item # C62VR.
The item # ETBC7 kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it. You will then connect the blue wire to the blue wire on the brake controller, connect the black wire to the positive post... view full answer...
I will be happy to help clear up the confusion. To add a 7-way connector to your 2014 Mazda CX-5 you will need the Universal Installation Kit for Trailer Brake Controller item # ETBC7 you were looking at. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your Mazda with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it.
The best brake controller for your CX-5... view full answer...
Welcome back and congrats on the new truck! The best Redarc brake controller for your 2021 Ford Ranger is going to be the Tow-Pro Liberty item # RED24FR. This is a proportional brake controller that automatically adjusts your trailer's braking based on the deceleration of your Ranger. The Liberty has a unique installation method where the main unit is concealed behind your dash and the only part visible is the control knob. This means no bulky brake controller to bang your knee on when... view full answer...
Yes, you can install the Tekonsha Prodigy P2 Trailer Brake Controller item # 90885 in your 2018 Chevy Traverse. The universal wiring harness needed for installation is included with the brake controller along with a mounting bracket. The 2018 Traverse's do not have a port to plug in adapter so you will need to hardware the P2 or any traditional brake controller you are wanting to install.
The only other option if you are not wanting to hardware a controller is to use the Curt Echo Wireless... view full answer...
The Tekonsha Prodigy P2 Trailer Brake Controller item # 90885 you were looking at would be a great option and one I highly recommend. It is compatible with hydraulic braking systems and trailer's having up to four axles. You will have to hardwire this brake controller in with the included universal wiring harness.
You'll need to use a circuit tester like item # PTW2993 to test the functions of the wires behind your dash. You will have to find the following wires to connect the brake controller:
Black... view full answer...
We sure do. Since your 2015 Ford F-150 has the connector for a brake controller, you will want the Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers item # 331-TPH-007. The connector is located behind the dash to the right of the steering wheel. I have attached a picture below that will help you find it.
For a compatible brake controller, I recommend the Redarc Tow-Pro Liberty Brake Controller item # RED24FR. This is a proportional brake controller that activates... view full answer...
The Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR is 20" long from the end of the connector to the end of the wiring.
This is the harness that is included with the Redarc Tow-Pro Liberty Brake Controller # RED52VR and the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. view full answer...
Yes, it can. The Redarc Tow-Pro Elite Brake Controller item # RED44FR can definitely be installed in your 2015 Denali 3500. Since your truck has the factory towing package you'll be able to install the Tow-Pro Elite using the Redarc Plug-and-Play Wiring Harness item # 331-TPH-010.
As far as your factory controller goes you will need to take your truck to the dealer and have the computer flashed to disable the factory brake controller. Doing this will remove all of the messages that keep... view full answer...
To install a Redarc Tow Pro Liberty in your 2023 Toyota 4Runner you will need the following parts:
Redarc Tow-Pro Liberty Brake Controller item # RED24FR
Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED49FR
Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-002 view full answer...
I have a great brake controller for your 2008 Chevy Tahoe but GM did not install the necessary port for a plug and play harness in your SUV so you will have to hardwire one in.
The best option brake controller for your 2008 Chevy Tahoe LTZ is going to be the Redarc Tow-Pro Liberty Brake Controller item # RED24FR. This is a proportional brake controller that activates your trailer's brakes when your Tahoe decelerates.
The reason the Tow-Pro Liberty is the best option is because of its... view full answer...
The electric brakes on your trailer are not intended to stop your entire rig - both your 2004 Dodge Ram 1500 Pickup and your hitched 6500-lb travel trailer - just the trailer itself. Your truck's hydraulic brakes have far more stopping power than the trailer's, which are generally going to be rated only for the trailer's axle weight capacity, not that plus your truck's considerable weight.
In normal driving conditions you will apply the truck's brakes and adjust the brake controller so... view full answer...
It sounds like your 2015 Audi Q7 does not have the factory tow package. To add a 7-way to your Audi you will need two separate wiring harnesses. The first one is the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT. This wiring harness does not require any cutting or splicing. It will provide you with a 4-flat connector to control the lighting functions on your trailer. I have linked an installation video below.... view full answer...
Since your 2006 Ford E-350 van already has a 4-way connector, you will need the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your vehicle with an included bracket. This kit is designed for use on a vehicle, like your van, with an existing 4-way flat trailer connector and plugs directly into it.
You will then connect the blue wire to the blue wire on the brake controller,... view full answer...
I would be happy to! The best option for a plug in brake controller for your 2016 Ram 2500 is going to be the Redarc Tow-Pro Liberty Brake Controller item # RED24FR. This is a proportional brake controller that activates your trailer's brakes when your Ram decelerates.
The reason the Tow-Pro Liberty is the best option is because of its unique installation method where the only visible portion is the control knob that's about the size of a nickel. The main unit is hidden away inside your... view full answer...
Go To Results